How to Reset a Maxshot Electric Scooter (2026)

There is no single "factory reset" button on a Maxshot foldable scooter, so it helps to be clear about which reset you actually need. In practice, resetting a Maxshot means one of three things:

• Soft reset (power-cycle): switching the scooter fully off and on to clear a temporary glitch or a stuck error code. This is what fixes most problems.
• Settings reset: restoring ride modes, cruise control or speed settings back to default through the companion app.
• Fault reset: clearing a specific display code like E2 or E7 after fixing its underlying cause, covered in our error codes guide.

Knowing which one you need saves time - a display code needs the cause fixed first, while a random freeze usually clears with a simple power-cycle.

The power-cycle is the safe, universal reset and the first thing to try for almost any odd behavior - a frozen LED display, unresponsive controls, or a code that appeared out of nowhere. Do it like this:

1. Power off fully: press and hold the power button until the display goes completely dark. Don't just let it sleep.
2. Wait 10-15 seconds: give the controller time to discharge and reset its state. A quick off-on is often not enough.
3. Power back on: press the power button and let the display come up. Do not touch the throttle while it powers on, or you may trigger an E2 signal fault.
4. Test: check the display, lights and controls. If the glitch or code is gone, the reset worked.

If the scooter behaves after a power-cycle but the same fault keeps coming back, the reset is only masking a real issue - work through the Maxshot troubleshooting hub to find the root cause.

When the display shows a code, a power-cycle can clear it - but only for good once you've addressed what caused it. Resetting on top of an unfixed fault just brings the code straight back:

Match your code and its underlying fix in the error codes E2-E7 guide before you rely on a reset. If a code only appears alongside a charging problem, confirm the charging routine is correct too.

If the problem is not a fault but a setting - the scooter is locked to the wrong speed mode, cruise control behaves oddly, or a limit was changed by accident - the fix is in the app rather than a power button. Open the Maxshot app, reconnect over Bluetooth, and set the ride mode, cruise control and any speed options back to how you want them. If the app won't connect in the first place, that is a pairing problem, not a reset one, and the pairing guide covers it. Note that restoring default speed settings will also undo any speed-limiter changes you made, so you may need to reapply them.

A reset clears temporary software glitches - it cannot fix hardware. If the scooter still misbehaves after a proper power-cycle, treat it as a real fault rather than resetting over and over:

• It won't power on at all: that's a power problem, not a reset case - see the won't turn on guide.
• An error code keeps returning: the underlying component (throttle, controller, battery) needs attention - start with the error codes guide.
• Weak power or short range: usually the battery, which no reset can restore.

If a fault persists on a scooter that is still in its first year, don't keep paying for parts - a defect that survives every reset is a warranty case, so see our warranty and returns guide to claim a repair or replacement.